Form 294

LIGHTING INSTRUCTIONS FOR #1332 CO₂ GENERATOR

  AFTER ALL WIRING AND PIPING HAVE BEEN COMPLETED

 1.  Make sure manual gas valve is in the "off" position. Turn the "gas cock dial" so that the "pilot" position lines up with the "pointer". Depress the "red button" down and ignite the pilot burner. Keep the button depressed until the pilot has burned for (40) seconds. Release button and pilot should remain burning. If not, repeat step no. 1.

 2.  Turn the gas cock dial counter‑clockwise to the "on" position.

 3.  Supply 24 volt electrical power to the Unitrol valve.

 4.  Consult the chart on Form 295 for proper pressure gauge setting. Turn on the manual gas valve until you obtain your desired reading on the pressure gauge.

 5.  To shut off the main burner and pilot, turn gas cock dial to the "off" position.

  To go back to the Navigation page click on the link below.
CO² GENERATOR MANUAL HOME PAGE